Safety Slitter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pocket-safe utility slitter.
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 132
- Wydruki
- 3
- Wyświetlenia
- 1497
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Use this compact slitter for cutting packing tape, opening bags, or slicing through shrink wrap. It uses the ubiquitous #11 X-acto knife blades, so you can always have a new sharp edge. The tip is always covered and the gap is narrow, so it is safe to keep in your pocket.
The blade slides in through a slot in the back and then drops down into a pocket. You then use a 7mm long piece of 1.75mm filament (shown in red in the photos) as a plug to hold the blade in place. To remove the blade, poke the plug back out with a paperclip and then use the paperclip in the oval slot to tease the blade back out of the pocket.
Print in the orientation provided and without supports. Use a 0.4mm nozzle (or smaller), and print with a 0.2mm (or less) layer height.
Note: This version is a significant redesign of my original posting that improves the attack angle of the blade.