1 / 2
Headphone Mount for Folding Table
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Headphone Mount made for clipping onto a tube that is 22.15mm outer diameter.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
Headphone mount I designed to clip onto the tube for a folding table I bought from Target. The inner diameter of the clip is 22.15mm so if you need bigger or smaller you could probably scale from there. I also printed in PETG so it wouldn't snap when mounting to the table since it takes quite a bit of force to mount it.