1 / 2
Scarab God and Dino DNA Magic the Gathering Token Covers — zdjęcie 1
1 / 2

Scarab God and Dino DNA Magic the Gathering Token Covers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cover to place over MTG creatures reanimated as tokens with The Scarab God's ability.

Ocena
5 / 5
Polubienia
29
Pobrania
113
Wydruki
2
Wyświetlenia
2675
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Public Domain

This is a cover to place over a Magic: the Gathering card that has been reanimated as a token by the scarab god! It leaves the name, art, and rules text uncovered, but covers up and replaces the creatures type and power/toughness.

The overall dimensions are 67mmx91mm, which is the online listed dimensions of the Dragon Shield sleeves I typically use, though the finished product looks to be slightly smaller than the sleeves I have so a bit of the sleeves shows through on the edges. This size is also slightly larger than the 63mmx88mm size of an unsleeved Magic: the Gathering card, so it should completely cover the edges of unsleeved cards

The cover is 2 mm tall in total, 1 mm for the body and another 1 mm for the text. If you want a thinner cover to fit this in your deck box without taking up as much space, I recommend scaling the height to 60%: 0.6mm for the body and another 0.6 mm for the text. One of the pictures shows a comparison of the 60% height (left) vs. the 100% height (right).

For earlier prints, I just painted over the letters with white paint. For later prints, I put a pause in the gcode and manually swapped out filament for a color change.

Prints in the pictures were printed on my Ender 3 with a 0.4mm nozzle and a layer height of 0.2mm.

Edit 5/27: Added a Dino DNA token cover, with the trample text at the bottom to remind that without potentially covering up rules text on cards with lengthy rules text. I would recommend printing it with the base color as green as a reminder that the token is green. The base and text are the same height, so filament color change should happen at the same layer.

Tagi