Air Mattress Inflator for Bike Pumps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple way to use a bike pump to inflate an air mattress.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 289
- Wydruki
- 0
- Wyświetlenia
- 960
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I needed a way to use a bike pump to inflate an air mattress. So I made a conical adapter to a Schrader valve (normal car or bike tire stem). I used ninjaflex to get a better seal but I am guessing pla or petg would work well too since the bike pump and air mattress should make a good seal on their side too.
Certainly not the best way to fill an air mattress but it works in a pinch.
GCode included uses a 0.6mm nozzle and the ninja flex profile modified from here. I have never bothered to get ninjaflex perfect but it is good enough for functional parts.