SuperHero NightLight Batman Superman
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Superhero nightlight with interchangable logos
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 671
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This project was inspired by several models from Printables as well as Thingiverse. It was an exercise in learning Fusion 360 while also creating something functional for my godchildren.
The construction uses some very specific hardware that had to be measured and modelled accordingly.
The base can either be set flat on a desk or alternatively attached to screws on a vertical surface via the keyhole hooks supplied.
The main body and focal unit screws together to allow focusing of the hero logo while the her logo parts have several indexers to allow a proper orientation of the image.
2x m3 screws and washers and hex nuts for the main body and cradle
2x m4 bolts for the light plug inside the main body
1x m5 gopro screw for the base
I am still undecided if I should paint it black as the brown filament was what was on hand. I am not an artist or painter and wish I could “weather” it.
Inspiration: