Dodecahedron Lamp (Thingiverse remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Dodecahedron Lamp with new Base and Side options
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 556
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This remix of the Dodecahedron Lamp includes a Base piece for a standard light bulb, and a new side piece option to restrict light flow. The Connector pieces have been reduced in height by 0.1 mm to fit together better.
Printing:
I printed the lamp from PETG as the Base and Sides of my first print were from PLA and were getting soft when so close to the lamp. All parts can be printed with thick layer heights since the only detail is in the cutout areas. I used 0.2 layer height.
Assembly:
The requirements to build a Dodecahedron Lamp are:
– 1 Base
– 11 Side pieces (this can be any combination of the ClosedSide and OpenSide pieces, depending on how much light you want in your room. For example: I printed 5 OpenSides and 6 ClosedSides, then assembled them to have light flowing toward one side of the lamp)
– 120 Connectors (each face of the lamp has 20 pieces, and each Connector links two Sides)
Depending on the lamp base and size of bulb you use, you may need to attach the Base piece to the lamp first, then the bulb, then the remaining Side pieces. Else, the lamp pieces may not fit over the bulb.
Thanks to IliasBarthelemy for the original model on Thingiverse.