Soda Can Silencer Prop Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pretty much just for fun, an item for aesthetics. Little part to fit a standard coke can to an airsoft gun or airgun -…
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 212
- Wydruki
- 0
- Wyświetlenia
- 2311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Pretty much just for fun, an item for aesthetics.
Little part to fit a standard coke can to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included.
This is to make something that looks cool, rather than a real useful item. While a can might have a large air volume, and while there is an impact on the noise level, a drinks can won't really function as a very useful sound moderating device compared to any other design and should not be treated as such.
The ridge lines are just for gripping, I've added files which are smooth if you dislike these.
Most printers can print 70 degrees overhangs, so you probably don't need to print with supports. The actual angle is 68.5 degrees, which should be doable.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: eSun PLA+ Black
Notes:
Most printers can print 70 degrees overhangs. If yours can, don't bother with supports.
Category: Sport & Outdoors