Ultralight Wasp Lure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a ultralight Wasp Fishing Lure. See My Website for more info and lures. Full build video below (32 Minutes)…
- Ocena
- 0 / 5
- Polubienia
- 91
- Pobrania
- 345
- Wydruki
- 2
- Wyświetlenia
- 2658
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a ultralight Wasp Fishing Lure.
See My Website for more info and lures.
Full build video below (32 Minutes)
Uses #0 Sinker Eyes from Lurepartsonline.com Perfect Rubber (fly tying stuff) - for the legs
Feathers - for the wings.
Hardware - #12 hooks w/ #0 Split Rings
Print Settings
Rafts:
No
Supports:
No
Resolution:
.10
Infill:
10%
Filament: eSun PLA Silver
Notes:
I print this lure in PLA with the following settings
(You'll have to experiment with what works best for you.)
Layer Height = .10mm
Top Solid Layers = 4
Bottom Solid Layers = 2
Outline/Perimeter Shells = 2
Supports = I do not use them but you can if you need too.
Infill = 10%
Post-Printing
Category: Sport & Outdoors