Sun Fish Swimbait Lure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of my Realistic Sunfish Jointed Swimbait Fishing Lure. I'd given up on that design but after learning…
- Ocena
- 4 / 5
- Polubienia
- 118
- Pobrania
- 737
- Wydruki
- 1
- Wyświetlenia
- 3263
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of my Realistic Sunfish Jointed Swimbait Fishing Lure.
I'd given up on that design but after learning about printing on fabric and making several other swimbaits that worked I'd though I revisit this design one last time.
The printing and build process is the same as my Swimbait Minnow and can be found HERE on my website and the painting process for this lure can be seen on THIS PAGE.
Enjoy.... and post some makes if you use these it lets me know I'm not wasting my time uploading my designs and if you like what you see check out more of my lures at https://www.theneverendingprojectslist.com/
Print Settings
Printer Brand:
MakerGear
Printer:
MakerGear M2
Rafts:
No
Supports:
No
Resolution:
.10
Infill:
80%
Notes:
First two layer heights depending on the fabric used. I used screen type materiel so I used .20 layer heights so the nozzle doesn't drag on the screen. I then switch to .10 for the rest for better layer detail.
Category: Sport & Outdoors