Flat Side CrankBait Lure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a flat side Crankbait type lure. I found a simple pattern online for making them out of wood and decided to…
- Ocena
- 5 / 5
- Polubienia
- 122
- Pobrania
- 687
- Wydruki
- 5
- Wyświetlenia
- 2496
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a flat side Crankbait type lure. I found a simple pattern online for making them out of wood and decided to duplicate it in CAD for 3D printing.
There are two versions of this one... the first one I printed looked awful skinny so I made a slightly thicker version too.
The skinny one works great although it required a bit of tuning to get it to swim straight but after getting it tuned it swims great and has a decent action to it. It does require a faster retrieve almost like a rattle trap.
The thicker version seems to swim a little better than the thin one.
*I used #4 Treble Hooks and #3 Split Rings on these.*
6-16-19 = Added a thick version with no eyes. (uses .25" or smaller stick on eyes.)
If you have any questions or problems with the files or fitment of the parts just let me know and I will try to fix them.
Enjoy.... and post some makes if you use these it lets me know I'm not wasting my time uploading my designs and if you like what you see check out more of my lures at https://www.theneverendingprojectslist.com/
Category: Sport & Outdoors