1 / 5
RC F1: HPD EVO Optional F1 2022 Front and Rear Wings for Narrow Body
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RC F1: HPD EVO Optional F1 2022 Front and Rear Wings and brackets
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 207
- Wydruki
- 0
- Wyświetlenia
- 2144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (43)Powiązane
Wing bracket goes inside the rear pod pocket; see the picture of reference. I used 0.12mm layer height for the best print quality. I used Polymaker PLA Pro and it work well but my latest model is made out of Polymaker PLA Polymax which is really soft and damps noise a lot which makes the car seem smoother without any rattles. Enjoy.