P3Steel Anti Z-Wobble
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my remix of the P3Steel X and Z axis parts that originally came with my with my printer. The main goal is to…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 511
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my remix of the P3Steel X and Z axis parts that originally came with my with my printer.
The main goal is to eliminate z-wobble effect that I was suffering after 7~8mm of printing height.
The printing quality is now insanely better.
This is what I changed:
- Fixed the Z threaded rod position based on irobri's cad files
- Added anti wobbling nuts based on toolson's anti-wobble system
- Added bottom holding locks to keep the 8mm smooth rods in place (keeping them from skipping out due to hole tolerance)
- Added top 625ZZ bearing support to threaded rod to limit wobbling effect
- Replaced tensor printed bearings by a tensor that accepts a couple of F604ZZ improving gt2 belt straightness
WARNING
Due to the deformation of my threaded rods the wobbling effect on my printer is so big the new system makes it a bit noisier, specially when performing Z homing.
During print the noise is almost the same.
Category: 3D Printer Parts