Key Storage Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wall mounted key storage box with latches
- Ocena
- 5 / 5
- Polubienia
- 76
- Pobrania
- 497
- Wydruki
- 3
- Wyświetlenia
- 2914
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
I was looking to buy one of these to help organize our keys. Most are more like safes, with key locks and made of heavy gauge steel. I wanted something to organize, hang on the wall, but simple and easy access.
I remixed the remixed Frog Box by adding some hooks. They are staggered to allow longer key rings to fit. It works pretty well. I'm going to drill a couple of holes and hang it on the wall of a closet.
The box and latch are not otherwise changed.
After printing this, I wish I had gone with more than the standard 3 top and bottom layers, or maybe a little more infill. The big panels feel a little more flexible than I wanted, but they will hold up just fine. No worries there.
The snaps are printed in PETG for both flexibility and durability.
I used M3 x 35mm screws, washers, and nuts to assemble. It did require I drill out the holes first (using a 1/8" bit).