1 / 4
Secret Lab 2020 Titan Chair - Cloud Swap armrest conversion — zdjęcie 1
1 / 4

Secret Lab 2020 Titan Chair - Cloud Swap armrest conversion

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The older PU armrests tend to develop cracks. Convert your 2020 Titan chair armrest to the new Cloud Swap armrest.

Ocena
5 / 5
Polubienia
59
Pobrania
852
Wydruki
4
Wyświetlenia
8299
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

Replace your old cracked PU armrests to with new memory foam Cloud Swap armrests.

I used 12mm x 2mm magnets.  They are press fit for me, but used some CA glue to keep them in place permenantly.  
 

Trim off the tabs on the perimeter used to hold on the previous armrest.

 After printing the peices I used some some adhesive backed foam like this around the perimeter of the pieces and pressed them into place.  They hold well and I can still remove them if needed.  I would not hesitate to CA glue or even better epoxy the pieces in after making sure everything fits properly.

Tagi