Car Marty Accessory Port Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The ultra rare car derivative of Fujitsu's FM Towns Marty console has a bit of a weird connector to get video and…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
The ultra rare car derivative of Fujitsu's FM Towns Marty console has a bit of a weird connector to get video and sound out. The leads for this are even rarer than the console so here's a compatible connector, the pin-out is on our website at http://www.re-enthused.com.
To use it you just need to get some pins, solder the wires on then push them through the right holes. I recommend hot-gluing the pins in from the inside.
This should be fairly easy to print, but some printers may have trouble with the small holes on the pin header.
Print Settings
Printer:
Raise 3D N2
Rafts:
Yes
Supports:
Yes
Resolution:
0.4
Infill:
100%
Notes:
It should be fairly easy to print, but some printers may have problems reproducing the small holes in the pin header.
This needs to be as rigid as possible to withstand being plugged in.If you have issues with printing the two guide arms you can cut them off the model, they just help keeping the connector straight.
Post-Printing
Category: Video Games