Tiled Wolverine Claws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiled Wolverine Claws ================= I have remixed them from "Wolverine Claws in plastic" by user "chefmaki". I…
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 1722
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Tiled Wolverine Claws
=================
I have remixed them from "Wolverine Claws in plastic" by user "chefmaki". I really liked this claws and my cousin wanted to have a pair of them for a costume party, but unfortunately they don't fit on most delta-printers because they are too large. No problem, tiled claws to the rescue!
I suggest printing them from ABS
...so you can glue the "dovetail"-part later with acetone.
Also uploaded the scad-file and the original STLs from chefmaki, because they are needed for modification on the scad file.
Instructions
Made from silver/grey ABS (ABS is suggested here because you can glue then together with acetone).
You might have to cut the dovetail-section down a bit, because the tiles of the claws have been seperated in software without a gap!
for one complete "Claw" you need
- 1x handle bar
- 3x bottom claw part
- 3x top claw part
Category: Accessories