tty2rgbmatrix desktop stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a desktop stand for my tty2rgbmatrix project that displays the currently running core on your MiSTer FPGA.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Public Domain
this is prototype v3 of my desktop stand for my tty2rgbmatrix project. this is meant to enclose two P2.5 HUB75 panels and a cut to size piece of LED diffusing acrylic. more info on the project can be found at the github
to assemble you'll need some M3*8 flat head screws to attach the HUB75 panels to the inner frame pieces and then 10 M2.5*8 flat head screws with coarse threading ( (i used some hardware i had laying around and am estimating the size for you) to bite into the plastic to attach the feet and the outer frame to the inner frame parts while sandwiching the LED acrylic in front of the panels.
I printed this at 0.2mm quality profile on my MK3S and the fit was fine. at 0.3mm draft things were a little tight with regard to corner tolerances so YMMV