Gaggiuino/IUIUIU Branded Drip Tray Covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Files for 3D print, flat laser cut, or bent sheet metal
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 331
- Wydruki
- 3
- Wyświetlenia
- 2945
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gaggiuino and IUIUIU branded Gaggia Classic | Pro drip tray cover with files for 3D printing, laser cutting, or sheet metal fabrication.
Print: PETG, 4+ top and bottom layers, make sure layer adhesion and flow is good. You don't want water getting inside
Flat Cut: Only use materials that can stand up to steam and boiling water. Acrylic is a good option, though may get a bit scratched
Sheet Metal: Designed for 304 or 430 Stainless Steel, 0.6 mm / 0.024" thick, 1.2 mm inner radius bends (169x99 mm outer box dims). Aluminum tested and will not work. Bends can't be made with most air-bending/press brake tools, ideally they're made with a folder.
UPDATE:
- 2024-01-29: Added IUIUIU files
Credit: Gaggiuino tray concept from Bigfoot#2389