1 / 5
The over-engineered Automatic Tool Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gears, springs, snap joints, flexible parts... This tool holder has 12 parts but everything is 3D printed...
- Ocena
- 2,667 / 5
- Polubienia
- 1051
- Pobrania
- 911
- Wydruki
- 3
- Wyświetlenia
- 11 235
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 3) (Komentarze: 14)Remiksy (0)Kolekcje (1381)Powiązane
This is quite an over-engineered tool holder, made to be mounted on a wall, as any other tool holder. But this one is self-clamping, using not less than 12 parts. And all of them are designed to be 3D printed - even the spiral springs…
However, the "grip" part on each claw is made with a SLA printer, using Prusa flexible resin. Flexible filament can be used as well. It's way more effective than hard plastic. But everything else is made of PLA.
Notes :
- Tiny indentations on the parts indicate the left sided ones.
- Everything is assembled without gluing anything (thanks to snap joints and hex keys), but the claws. They're glued to the axis with a touch of cyanoacrylate, at the end of the assembly (it's easier that way).
- 0.2mm layers are fine
- Assembly and tool holder in action videos are available on my Instagram account @cask_tools