1 / 6
BambuLab Carbon X1  Nozzle Holders 0.2 to 0.8 Bambu Lab — zdjęcie 1
1 / 6

BambuLab Carbon X1 Nozzle Holders 0.2 to 0.8 Bambu Lab

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nozzle holders for the Bambu lab X1 series printers . 2 new files for complete hot ends.

Ocena
4,833 / 5
Polubienia
117
Pobrania
560
Wydruki
9
Wyświetlenia
4807
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

 

The Complete Nozzle holder will fit the complete hot end with the nozzle sock. There is 2 versions of this one , 1 with numbers and Carbon name and one without so you can add your own text to it in the slicer.

UPDATE ,

Added a 4 place Complete nozzle holder to hold 0.2 to 0.8 with dual magnets. this will hold the complete hot end with nozzle sock .

 

I wanted a place to store extra nozzles and labeled what size they are for easy identification. This also has a 60 x 10 x 3mm magnet spot on the back so it can be mounted to anything metal . You could put one magnet on the inside of the printer and stick the holder to the outside .  Link to magnets used ,

https://www.amazon.com/dp/B081W64CSR?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

 

I just used standard Pla  settings in the Bambu slicer to print these

Tagi