Elastic Headstrap for Protective face shield / COVID19
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made an elastic remixed idea from https://www.prusaprinters.org/prints/26330 But I design this for FLEX filament…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 782
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made an elastic remixed idea from
https://www.prusaprinters.org/prints/26330
But I design this for FLEX filament printing an d optimized design.
I used Ice Filament FLEX which has high shore (== not so flex)
This could be sterilize at 70degree.
This design is compatible with the face shield design I prefer which is https://www.prusaprinters.org/prints/27356-headband-europa-a4a (A4 PETG) or his other design https://www.prusaprinters.org/social/53302-peter-m/prints
(congats @Peter M for such perfect design! with fast print)
Print instructions
220 degree for nozzle, 0.30 mm per layer. Nearly Prusa slicer FLEX filament setting except temperature.