1 / 6
PSP GO (PSP-N1000) Shoulder Buttons L & R — zdjęcie 1
1 / 6

PSP GO (PSP-N1000) Shoulder Buttons L & R

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement shoulder buttons L&R for the Sony PSP GO (PSP-N1000) handheld console

Ocena
0 / 5
Polubienia
31
Pobrania
257
Wydruki
0
Wyświetlenia
1501
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These are the 3D models in .STL, .3MF and .step format of the shoulder buttons for the Sony PSPGO (PSP-N1000) handheld console.

The left shoulder button on my PSP GO broke and I could not find a replacement button. I modeled and printed the two buttons to fix it. The buttons work very well. If you are in the same situation as me these models can save your PSP GO.

How to print

If you are lucky enough to have an SLA printer, I advise you to use it to print this model.
The model can also be printed with a 3D FDM printer as I did. To do this use a low printing speed of 30mm/s, a layer height of 0.08mm and a lot of cooling. The parts on the picture were printed in PLA with carbon fiber of unknown brand. It is a very small and precise model. Make sure you have calibrated your extruder steps on your machine and set the flow for your filament.

You need to add supports for the print and use the same orientation as the models on the screenshot.

Be very careful when removing the supports not to break a part! The two small cylinders are very fragile. To make it easier to remove the supports without damaging the part, I advise to raise the part by 1mm so that the small cylinder is on the supports and not in contact with the bed.
 

Tagi