Gryphon Brushless Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the Flywheel Cage for usage of RS1507 Motors. Also there's a mod of the battery stock for fititng of a SSD1306.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 128
- Wydruki
- 1
- Wyświetlenia
- 2018
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my attempt of a Brushless Solenoid Gryphon. I used RS1507 Motors ("Ready to SKY" from Aliexpress) with Emax BLheli 12A ESC. I also tried to make it fit a chinese knock off solenoid, which I cannot recommend. This also features a SSD1306 OLED Display and two buttons to select between firing modes and the amount of power. The firing process is activated by one single trigger and is controlled by a Wemos D1, a Arduino should work too. The source code is included and should be updated with your own solenoid timings.
Currently working on SLA printable flywheels with better grip and balance for high power output.
The base of my Gryphon is the Solenoid version of “Egghebrecht”.
If you're curious about the thing hanging out of the stock, it is a adapter for my Bosch 12V powertool batterys.
See it shooting on Reddit: https://www.reddit.com/r/Nerf/comments/wsnpm9/built_a_solenoid_gryphon_with_3s_brushless_motors/?utm_source=share&utm_medium=web2x&context=3
Follow me on Instagram for more interresting projects: meffken_baut
Have fun building this and keep asking if there are any questions.