Prusa MINI+ Power Supply Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic bracket to wall-mount the PSU of a Prusa MINI+
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 342
- Wydruki
- 15
- Wyświetlenia
- 1463
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a pre-exported version of my generic mounting bracket model.
Compatibility:
In the download section you will find models for the two power supply models that came with the Original Prusa MINI/MINI+ printers.
| DELTA ELECTRONICS ADT-150C24AC | MINI-delta-psu-bracket |
| Mean Well GST160A24-R7B | MINI-meanwell-psu-bracket |
My original design only contained a file for the Delta Electronics PSU that I have on my MINI+. Before I did a re-desing on this, Prusa MINI+ Meanwell Power Supply Holder by Anony had you covered in regards of the Meanwell PSU. Checkout that design if you like the old FÄSTA style more.
Print instructions
Slice with Prusa Slicer's Arachne or have a look at the ‘Recommended thin wall thickness’ section in my original model; Use as many perimeters as needed to span the parts thickness; No infill, zero top and bottom layers.