1 / 3
Meanwell LRS 150 series DIN Rail adapter bracket and mains wiring cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting bracket to mount the Meanwell LRS 150 Series to a 35mm DIN Rail, using the Voron Trident PSU Brackets
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 183
- Wydruki
- 2
- Wyświetlenia
- 1152
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (21)Powiązane
Why?
I needed a slimline mounting solution to mount a Meanwell LRS 150-48 to a 35mm DIN Rail, printable on the limited space of a Voron 0.1
Features:
- Uses the PSU Brackets of the Voron Trident, privided below
- Two part design to be printable on the small space of a Voron 0.1
- Cover for mains wiring connectors to protect you from shocking news…
Requirements:
- Use any material you like, simply doesn't matter, I don't suggest TPU… :-)
- The 4 mounting holes for the Voron Trident PSU Brackets have to be equipped with M4 heat inserts
- To mount the PSU to the bracket I used M3x8mm button head screws
- The 2 mounting holes for the mains cover need to be equipped with M3 heat insert
- To mount the mains wiring covers I also used the M3x8mm button head screws
Hope you like it, comments and feedback always appreciated :-)