1 / 5
Nissan Versa glove compartment latch mechanism — zdjęcie 1
1 / 5

Nissan Versa glove compartment latch mechanism

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I own a 2011 Nissan Versa SL. I noticed one day that I was unable to open the glove compartment. The handle was…

Ocena
0 / 5
Polubienia
3
Pobrania
22
Wydruki
0
Wyświetlenia
641
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I own a 2011 Nissan Versa SL. I noticed one day that I was unable to open the glove compartment. The handle was broken. After a google search and a few telephone calls later, it seemed that the 50 cent part would cost over $100 and require replacing the entire glove compartment door. I found instructions on how to open the door.

A. With a flathead screw driver, carefully pry off the handle (from the side)

B. Push down into the notch, the retention mechanism to open the glove compartment

C. There are 2 philips head screws holding the mechanism in place.

D. The "nub" on the spring mechanisms is fragile and breaks over time.

See here (not my youtube video) : https://youtu.be/YQoSXJdJF3g

A tuber posted a video on how to open the glove: https://youtu.be/mhRDDm4y7fU

Print Settings

Printer Brand:

RepRap

Printer:

Prusa Wilson

Rafts:

No

Supports:

Yes

Resolution:

200

Infill:

100

Notes:

Orient the part vertical and enable support structures for the latch stand-off and the spring insert. Sliced in Cura at 200 um resolution with 100% infill in ABS

Post-Printing

Cleaning up the print

The printed part should be cleaned up of any support material. The spring site should be drilled out to remove excess support material. The top of the part will need to be sanded (preferably with a dremel) to insure proper fit into the the latch mechanism. I vapor polished the part for 45 sec after sufficient sanding

How I Designed This ===================

Designed in Autodesk Inventor

Category: Automotive

Tagi