Quick Release Camera Mount - Ender 3 S1 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal camera mount for Ender series. Designed for S1 Pro but will work with others.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 222
- Wydruki
- 2
- Wyświetlenia
- 1656
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A Universal camera mount for the Ender 3 S1 Pro (And other models)
Simply clips on to the standard bed belt tensioner. It will work either way around, but was designed for use as pictured.
I've included a few different extension bars so you can get the perfect viewing angle, as well as a double ended threaded extension to use when the mount is upside-down.
Really easy to print. It takes around 2 hours with the settings I used.
Any Questions please comment :) - Let's see some makes!
Print Settings
Printer:
Ender 3 S1 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.28
Infill:
Cubic 20%
Filament brand:
Copymaster3D
Filament color:
Lime Green
Filament material:
PETG
Notes:
Supports everywhere at 45 degrees, density 10% and a support blocker over the underside hole. - This should just add support to the gaps between the 4 tabs. That is all that is needed for a good print.
Printed at 70mm/s in PETG
Parts Cooling: 50%