Prusa Mini Cooling Duct with better clearance
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the V2 Cooling duct that allows for more clearance at the back of the print bed.
- Ocena
- 4,75 / 5
- Polubienia
- 29
- Pobrania
- 145
- Wydruki
- 5
- Wyświetlenia
- 1003
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Loved this cooling duct option but when I printed the original I found that the cooling duct would hit the pins at the back of the print bed (see image showing the damage on the duct). This does not happen very often as you would need a very big print for the head to get there but it does also happen when doing a standard first layer calibration.
Print using the original instructions. Print upright with supports for the central fins in the input ducts. I personally also added supports in the output openings. Printed at 0.15mm with 0.4mm nozzle in ASA.