1 / 2
Railroad train EOT device - 1:29 Scale — zdjęcie 1
1 / 2

Railroad train EOT device - 1:29 Scale

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A G-scale 1:29 scale EOT.

Ocena
0 / 5
Polubienia
22
Pobrania
209
Wydruki
0
Wyświetlenia
1233
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution

A G-scale 1:29 scale EOT. Sometimes referred to as a flashing rear-end device (FRED) or sense and braking unit (SBU).

You will need:

  1. a 5mm flashing red LED. I recommend one from Evans designs for a more prototypical flash rate. https://www.modeltrainsoftware.com/products/slow-flash-led?variant=28802793734192
  2. a bit of 17Ga wire (bent to form the handle.
  3. a JST PH2.0 connector. like this https://www.amazon.com/daier-Micro-2-Pin-Connector-Female/dp/B01DUC1O68
  4. Battery and/or switch.

This was designed to fit a Kadee G scale coupler. Best to glue permanently to one.

Tagi