1 / 1
Aquarium Juwel 450 floating plants barrier — zdjęcie 1

Aquarium Juwel 450 floating plants barrier

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Barrier made for the juwel 450 aquarium to keep floating plants in one part of the aquarium

Ocena
0 / 5
Polubienia
10
Pobrania
54
Wydruki
0
Wyświetlenia
1835
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Public Domain

The barrier fits over one of the support beams of the Juwel 450 aquarium. It was made for 6cm wide beams so maybe it fits other models too. And if a different size is needed it should be pretty easy to adapt. They are made so that they only hang into the water by a few mm and are only barely visible.

For a complete barrier print 2 parts with the 2 holding bars centralised and one with the holding bars at the edges. The one with the bars at the edges goes in the middle of beam, the other 2 go left and right. This closes of part of the aquarium so floating plants can't get caught in the filter. 

Tagi