Portafilter Scale stand for Delonghi Stilosa EC230 or EC260
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got tired of standing my portafilter on a scale as is~ so i made a simple stand when I'm using pre-ground coffee
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 590
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple stand to put your portafilter on when measuring preground coffee straight to the portafilter. It can also be used for distributing, tamping, or just putting your portafilter on standby.
The holes are also high enough that the tip of the portafilter is not touching any table surface, But i would recommend adding foam/rubber feet to make it non slip and stable.
My prints used PLA because I ran out of PETG but it is recommended to use PETG for higher heat tolerance and Food Safety