GoPro 7 floating case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a floating case for the GoPro Hero 5,6,7. It is important to keep the case light but also airtight so take…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a floating case for the GoPro Hero 5,6,7.
It is important to keep the case light but also airtight so take caution at the slicer settings.
10% infill is required to keep the structure sturdy and to support the top layers.
The case needs to be able to flex, so use TPU only.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
10%
Filament:
Any TPU A95
Notes:
Use 2 layers for the walls, 4 layers for top and bottom.
The mounting ears needs stronger walls, so create overlays in the slicer and increase the wall layer counts for this region to 5 (100% infill).
Block support for the mounting ear holes and for the parts keeping the camera in place.
Keep the supports for the push-button holes only.
Slicer settings are a bit tricky, so you may use the attached gcode I made for an Ender 3 (S1).
Category: Camera