Adjustable Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool holder for various sizes and diameters of spools
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 771
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Hello together,
Unfortunately (nearly) every filament manufaturer has a different spool size (width). Therefore I designed myself an adjustable spool holder. My goal was to mount it ontop of my enclosure without the need to fix it to somewhere.
The holder also works perfect with 2.5kg (Ø300mm) spools.
What you need:
Printed Parts:
- 1x Groundplate
- 2x Bearing Holder right
- 2x Bearing holder left
- 4x Bearing screw
- 4x Bearing holder
Mechanical Parts:
- 4x M3 Screws >14mm
- 4x M3 Nut
- 4x Bearing 608 2RS 8x22x7mm
Note for assembly: The “Bearing holder” inner diameter is smaller than the bearings outer diameter, therefore it is intended to press the bearings into the holder (I used a vise).
Happy printing :)