G27/G29 Magnetic Shifter Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix that better fits G27/G29 wheel as it's a bit bigger so it's easier to put and screw on (shorter screw…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 802
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is a remix that better fits G27/G29 wheel as it's a bit bigger so it's easier to put and screw on (shorter screw can be used) and has a small 2° angle. It is also made for 20x10x2mm magnets. This all results in a very nice snug fit of magnets against the paddles. I also increased a wheel nut tolerance just a bit as original was too tight for me.
Surprisingly enough it won't break when being stretched a lot to fit over the wheel base, as long as 6+ walls are used, infill is less irrelevant. In my case I used PLA.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
5%
Filament: BasicPLA PLA Black
Category: Games