Ventilator Circuit Splitters - reinforced & thicker walls
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
THIS HAS NOT BEEN TESTED ON A HUMAN PLEASE REVIEW THE SOURCE INFORMATION AND DISCUSSION THREADS REGARDING THESE SORT…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 226
- Wydruki
- 1
- Wyświetlenia
- 1435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
THIS HAS NOT BEEN TESTED ON A HUMAN
PLEASE REVIEW THE SOURCE INFORMATION AND DISCUSSION THREADS REGARDING THESE SORT OF DEVICES.
I used Andrew's original model to create this variation. It should result in a stronger splitter for those of you who feel they need it to be stronger.
Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate conversation. The world is running out of equipment, we need to think about alternatives.
Fusion 360 file included below.
https://a360.co/2X5TP2P
Link to Flow Restriction Device for Multiple Patient Lung Ventilation
https://www.prusaprinters.org/prints/27851-flow-restriction-device-for-multiple-patient-lung-
Link to One Way Flow Restriction Valve for Multiple Patient Lung Ventilation
https://www.prusaprinters.org/prints/28055-22mm-one-way-flow-restriction-valve-for-multiple-p
Print instructions
Follow the printing guide on Andrew Clarke's original upload.
https://www.prusaprinters.org/prints/25808-3d-printed-circuit-splitter-and-flow-restriction-d