1 / 4
Taller ramp for the taller base for the collapsible dice tower — zdjęcie 1
1 / 4

Taller ramp for the taller base for the collapsible dice tower

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cleaned model and improved ramp to prevent dice getting stuck inside

Ocena
4,952 / 5
Polubienia
247
Pobrania
1308
Wydruki
24
Wyświetlenia
6862
Oceny
21

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The original “taller base” remix had some extraneous internal geometry, and while the walls and door opening were extended, the ramp was left as is. Since the base ramp and the “2nd layer” piece were designed to create a seal, raising the point at which it sits without also raising the ramp walls broke that seal.

I found that with the unaltered “taller base”, I would occasionally leave dice stuck on the upper lip of the ramp walls around the insides of the tower, particularly the pointier dice like d8 and d4. I also found that the ramp was a little shallower than I'd like to get a nice roll into the dice tray.

In order to mitigate those 2 issues, I cleaned the model of it's internal geometry and stretched only the internal ramp upwards by 8 additional millimeters, roughly as far as I could without interfering with the collapsed pieces.