Classical Guitar Footstool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A foot stool for classical guitar that you put on top of a cardboard box
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
I needed a foot stool for playing classical guitar, but I wasn't able to buy one right away. I also didn't want to spend 10+ hours printing one out. This printed foot stool combines with a cardboard box to give it height without the long print time.
I chose this size box because that is the kind of box my prescriptions come in every month, so I would have replacement boxes if I messed one up. The measurements of the box are 16cm Long by 10.2cm Wide by 16cm tall.
I printed this model in PLA with a 0.20 layer height and 15% gyroid infill. I placed it with the flat part facing down, and no need for supports. Took almost 6 hours to print (but that's less than 10!).