Ultra Ball PokeBox Reverse Opening
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Same Poxebox you've come to love, but now opens like an actual Pokeball! Or at least, how I want it to open anyways.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 383
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the same basic idea as the other Ultra Ball Pokebox that I have, but I reversed the hinge on it to open like an actual Pokeball. Or at the very least, how I kept trying to open it as I used it! I decided to create a new design instead of putting these files into the previous design so I wouldn't bloat the files and cause any confusion. Same instructions and parameters as the other as well.
All the same kudos and shout outs go to 3D-Printing-World and How2Texan for models and design ideas!!
(Will add actual pictures after it comes off the printer.)
Instructions:
Slicing done with Ultimaker Cura
I printed everything at .16 layer height because I wanted a finer end product for my deck box that required very little post processing
The Ultra Ball Insert, Ring, Catch, and Button were printed at 100% infill.
The Base, Lid, and top/bottom Lööps were printed at 5% Gyroid infill with 3 perimeters.
Supports were needed for the lööps, the button, and the Lid itself. The button could probably have been printed with no supports, but like I said I wanted very little post processing.
For the combined lööp and bottom, I used the same parameters as above!
Oh! And don't print the assembled model. Tis just for reference!