Photo camera AirTag Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An AirTag holder for the lovers of photography!
- Ocena
- 4 / 5
- Polubienia
- 19
- Pobrania
- 93
- Wydruki
- 2
- Wyświetlenia
- 791
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This AirTag holder is perfect for photography lovers.
Print instructions
This model is made of two parts that need to be printed as follows:
- Front: print with the provided orientation at 0.2 mm layer height, without supports. To make the dual color accents, you need to add a color change point at layer 37 (7.40 mm Z height). The model includes thin layers to close the horizontal openings to avoid the use of supports. When the print finishes, you just need to cut the thin filament layer that covers the pocket for the AirTag and the hole for the cord. To do this, you can use a sharp object - a Xacto knife worked great for us.
- Back: The back is made of three parts: body, accent1, and accent2. The file Back.3mf includes all three parts with the right position/alignment relative to each other. To obtain the multi-color effect, you can try one of the two approaches below. There are two versions of the Back cover:
- Back_multicolor1: the accent parts are very thin and intended to print first. Then you can run a second print of the body on top of that. This is the “inlay” technique. Works well with dark colors.
- Back_multicolor2: in this case, you'll need to configure your slicer to have two different extruders and assign the colors to the different parts.
Follow us / support
Did you like this design? Follow us on Instagram! We are @twothingies
If you really like what we are doing and want to support us, you could buy us a coffee or two!
Selling prints of our designs
Please be aware that our designs are available for free for non-commercial purposes only.
If you would like to sell 3D prints of our designs in your store, you can join one of our membership tiers!
If you have other ideas, we would be happy to discuss that with you! Please send us a message if you are interested at [email protected]
Disclaimer
Due to the different properties of 3D printing filaments and the tolerances of different machines, you might need to scale up or down some of the print files, in case they don't fit when you print them.