1 / 3
Wall drilling guide and dust collector. 3-10 mm. No suports
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple to use, simple to print. Guides from 2 to 10 mm.
- Ocena
- 4,8 / 5
- Polubienia
- 35
- Pobrania
- 291
- Wydruki
- 6
- Wyświetlenia
- 714
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 6) (Komentarze: 6)Remiksy (0)Kolekcje (68)Powiązane
Remixed from thingiverse 3023372. No need fir supports.
Printed in PLA+. Nothing special needed.
20% infill is more than enought
I used brims for the guides.