Elektron Digitakt Digitone Syntakt Protective Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Built a taper into the design so if printed with the face adhered to the print bed, this should barely fit onto a…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1061
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Built a taper into the design so if printed with the face adhered to the print bed, this should barely fit onto a 220mm wide bed.
This print was broad enough to start warping, even with PETG, however it didn't affect the outcome enough to matter.
The channel is so a strap can be used. This fits into Elektron's carry bag for 2x Digi's really well.
Print Settings
Printer:
i3 Type with 220x220 print bed
Rafts:
No
Supports:
Doesn't Matter
Resolution:
biggest you can
Infill:
I'd avoid it
Filament:
Doesn't Matter PETG
Category: Audio