Bargraph bezel (for 28 segment bargraph)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was originally using the bezel kit from Spongeface42, but I wanted to add a little bit more depth to it, so I…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 588
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I was originally using the bezel kit from Spongeface42, but I wanted to add a little bit more depth to it, so I designed my own bezel to use with the lens and decals that comes with Sponge's kit.
It should be a snug fit, but you may have some cleaning to do with an exact knife/scalpel.
Link to Sponge's kit: https://www.gbfans.com/forum/viewtopic.php?t=34891
Link to the GBFans wand electronics: https://www.gbfans.com/shop/electronics/proton-gun-wand-light-kit/
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
100%
Filament: Verbatim PLA Black
Notes:
Print with a 0.2mm nozzle, and with the bridging setting enabled.
Category: 3D Printing