Bargraph-Spinning Display fitting.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is custom part I designed to hold both the GBFans bargraph with the lens/bezel kit from Spongeface, and the…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is custom part I designed to hold both the GBFans bargraph with the lens/bezel kit from Spongeface, and the Spinning display from JupiterElectronics. Please note that without the bezel kit from Spongeface, the bargraph is sticking out from the fitting by 2mm; and that depending on the brand and type of filament you are using, some sanding on the inside may be required for the parts to fit.
Preview video: https://www.youtube.com/watch?v=AZv2YxKGCis
GBFans Wand lights kit: https://www.gbfans.com/shop/electronics/proton-gun-wand-light-kit/
Lens/Bezel kit: https://www.gbfans.com/forum/viewtopic.php?f=31&t=34891&hilit=bargraph+bezel
Spinning Display: https://www.etsy.com/listing/852301022/ghostbusters-prop-tvg-spinning-displays
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
100
Filament: Verbatim PLA Black
Category: 3D Printing