Mixing tube (cone) for epoxy glue
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mixing tube (cone) for epoxy resin or similar two-component glues and such.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 235
- Wydruki
- 0
- Wyświetlenia
- 1060
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
Mixing tube (cone) for epoxy resin or similar. Can be used with the epoxy mixing "pistol" or without it. It is designed to fit standard two-component glues and substances such as the Wurth ESK-50 Fast bonding adhesive.
I have combined two models:
https://www.thingiverse.com/thing:2349206
+
https://www.thingiverse.com/thing:5072919
and modified the result model to fit my purposes.
It is field-tested, it works OK.
Print it standing on the bed by its base. It works fine but be careful when handling - it is prone to breaking.
Basically any material is fine - I used transparent PLA.
Resolution 0.2mm is fine.