Enclosure for Sonoff Dual R2 and TH16 WiFi switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for Sonoff WiFi "smart switch" with 1 or 2 power sockets.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 661
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This enclosure incorporates the relay and the power sockets. I use this for all my printers (power and raspberry-pi) and for other electronic appliances (fan, hi-fi).
The original crapy Sonoff box is not needed anymore. The PCB is screwed to the box. The manual switch remains visible and the LED shine through the lids's body (one click for socket 1, double-click for socket 2). The lid gets fixed with M2 screws. The 230V cable is secured with a zip tie for strain relief. The FLF13 sockets (Feller) are simply clipped in without any screw.
Print instructions:
Print in PETG or ASA, layer height of 0.3 mm.
Small support only needed for cable tie.
I would recommend to jailbreak the Sonoff software (e.g. Tasmota).
Only for people who know to handle electronical devices (electrical shock hazard)!