Printable Pin for Pi Zero Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable pins to use in a stationary pi zero case, great if you don't have the right hardware on hand.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 223
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Pins to secure your Pi Zero case if you're like me and don't keep M2.5 on hand. These should work fine for stationary applications, though I would be hesitant to put them in a high vibration or other moving application. Pins are slightly oversized over the case hole dimensions and should be a snug fit to put in place. Obviously not as strong as screws, but at 5 minutes to print gets you up and running quickly.
Recommend printing with 4 walls to make sure the whole model prints without infill.
My print was done using PolyMaker White PET, 0.15mm layers with 4 walls on my Prusa Mini.