Platypus Collapsing Staff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collapsing staff inspired by a platypus
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 598
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
This collapsing staff is inspired by a platypus
All collapsing staff are roughly 44 inches or about 112 cm long fully extended but that is highly dependent on tolerances of your printer and the model.
Print Settings
Layer height and infill at your discretion, I use 0.3mm layer height and 7% infill
Make sure your line width in cura is set to 0.5mm and extrusion width is set to 0.5mm in prusa slicer for perimeters
Supports are required for printing, make sure there are no supports in the model above the rings.
As with most of my models commercial license is included just mention I made it