Frsky XM+ Holder/Mount for 20mm x 20mm Stack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Frsky XM+ Holder/Mount for 20mm x 20mm Drone Stacks.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Why and How:
The reason why I decided to design another 20 mm x 20 mm stack holder for the frsky XM + receiver was, that there was no place for a receiver in the Eachine Tyro 69. So this had to be extremely space-saving.
The ESC is installed directly above the receiver and its components protrude downwards. My design allowes to save as much space as possible.The spacers of my holder are only 0.5mm larger than the originals.
I also decided to install the receiver upside down and protrude slightly forward. So you can easily reach the bind button from below without any components or cables in the way. The LED's can be seen from behind.
The receiver can simply be pushed into the holder and when the next component is installed on the stack, the receiver is clamped.
Printsettings:
I used 100% infill and SainSmart TPU.
I hope it helps you and I wish happy flying :)