Bambu - PolyMaker 3D Cardboard spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to fit the ABS Polymaker 3D Cardboard Rolls As Seen on Edge of Tech YouTube channel **Recommend to use ABS
- Ocena
- 4,833 / 5
- Polubienia
- 196
- Pobrania
- 1511
- Wydruki
- 6
- Wyświetlenia
- 11 723
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Designed to fit the ABS Polymaker 3D Cardboard Rolls
snaps in place, its designed to fit snug and little teeth to help it in place with added teeth to help grip the wheels inside the AMS
just print 2 of them and your good to go!
Should fit any cardboard roll with an Interiors OD of 55mm and outside OD of 200mm +/-
Settings:
Top/Bottom: 4-5 layers
Infill: 35-44% gyroid or similar
Print time: 90min on regular settings
Materials: 40-45gram
Material: ABS/ASA recommend
As Seen on Edge of Tech YouTube channel https://youtu.be/VHz5xD6d8p0 5:30 timestamp.
Change log:
Sept 20
- moved teeth in 2mm to prevent rubbing on top of AMS
- added 2 files 1 with lock in piece and one without
Nov 22:
- Added a no lip feature with beefed up interior wall and “Teeth” on the inner lip to help hold into place. You'll need to press them into place and removal should be done from the backside.
Nov 30:
- forgot to upload lip-less spool