Polycoin for Polymaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model entry for the Polycoin contest from Polymaker.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
Coin designed for the Polycoin contest from Polymaker
I wanted to do a 50mm diameter coin, not so much into the "calibration coin" but more into the "looks nice, I want to keep it" but still usable for a little of calibration and as a swatch.
Specs:
-50 mm diameter, 10 mm height (the coin it's 9mm but has a 1 mm lip).
-Printable with around 10 g of filament (suggested 10% infill, 3 walls, 3 top, 3 bottom, but use your settings and experiment).
-Dual color printable even with manual filament change.
-10 Polymaker logos (1 top, 1 bottom and 8 around the edge of the coin).
-Swatch like design(The edge logos and molecule-like design, the bridging and flat surfaces will give you a good idea of the finish that your prints will have and how light will interact with it).
-Stackable (I wanted something more than "print and let it free on your desk thing" so you can print many coins on different filaments, stack'em and have a nice swatch tower of coins)